
PASSENGER TIRE CHANGER 8511
♦ Tire changer with pneumatically tiltable column from front to back.♦ Simultaneous pneumatic locking of horizontal and vertical arms with...
Geometry device for measuring and adjusting the wheel angle.
* Each sensor measures electronic level.
* Sensors are automatically switched off in case of inactivity.
* Sensors powered by rechargeable Ni-Mh batteries (N°4 for each sensor).
* Software under Windows, choice of 32 languages.
* New, simple and fast graphical interface to select the available functions and display the measurement data.
* Alignment angles measured using CMOS goniometers.
* Steering angle measured directly by the sensor.
* Database containing more than 20,000 vehicles.
* Work procedure configurable according to the user's needs.
* Data setting in millimeters, inches, 60° degrees or 100° degrees.
* Help" function always available on the screen.
* Two run-out compensation programs, for each wheel (vehicle with raised wheel) or simultaneously on all four wheels (by pushing the vehicle).
* VEHICLES program with "BECQUET".
* Program "SWIVEL DISCONNECTED", quick adjustment of the toe.
* Service and diagnostic programs.
With GEO 10 system, you can detect
:* TOTAL PARALLELISM*
CARROSSING OR INCLINATION*
HUNTING*
PIVOT INCLINATION*
VARIANCE STEERING ANGLE*
WHEEL RETURN SET FOR THE SAME AXLE*
PUSH ANGLE
Security guarantees
100% secure CB payment, PayPal accepted
Delivery policy
Delivery TNT
The delivery is offered from 150€ HT of purchase, below this sum, a participation of 12.50€ HT will be charged to you for France ,9,50€ HT for Germany, Belgium, Denmark, Luxembourg and for the Netherlands, 20€HT for Spain, Italy and Portugal.
The delivery is offered from 250€HT of purchase, for Austria, Hungary, Ireland, Poland, the Czech Republic, Slovakia, Slovenia and Sweden below this amount, a participation of 20€HT will be charged.
The delivery is offered from 500€HT of purchase, for Switzerland, Litchtenstein below this amount, a participation of 50€ HT will be charged to you, because of a supplement except CE and supply of a pro forma for the customs.
16 other products in the same category:
♦ Tire changer with pneumatically tiltable column from front to back.♦ Simultaneous pneumatic locking of horizontal and vertical arms with...
TIRE CHANGER HC8511Maximum wheel diameter: 1150 mmMaximum permissible rim width: 14 inchesClamping jaws (inside): 12 to 25 inchesClamping jaws...
♦ Fixed balancer for passenger and van wheels.♦ Digital readout with high brightness LED display and integrated keyboard easy to use, simple and...
THIS PRICE INCLUDES INSTALLATION AND TRAINING AT THE MANUFACTURER IN HOLLAND (50 KILOMETERS FROM ANTWERP)
♦ Ideal for tire, brake, suspension and body maintenance.♦ Surface or mobile use with optional mobile kit.♦ Special, convenient platform extension...
- The cylinder stroke is 915 mm. - Lifting process with hydraulic cylinder. - Iron motor with steel tank.The power unit adopts CBK gear pump as...
BRAKE PEDAL LOCK STEERING WHEEL LOCK FRONT TURNTABLES PRINTER SUPPORT (NOT INCLUDED) SUPPORT FOR THE 4...
* Electro-hydraulic lift to be built in * Mechanical safety with air release. * Possibility of manual descent in case of emergency. * Safety valve...
♦ Tire changer with pneumatically tiltable tower.♦ Simultaneous pneumatic locking of horizontal and vertical arms with automatic positioning of the...
♦ Wheel balancer for passenger cars, 4X4, light trucks and motorcycles.♦ Microprocessor controlled electronic wheel balancer for balancing wheels...
* Very robust and balanced construction. * Low profile design. * Transportable. * Safety valve for the descent. * Safety valve in case of...
♦ Designed for truck wheels, bus wheels.♦ Implemented distance and wheel diameter insertion manually.♦ 3 ALU functions and static balancing...
Lifting capacity: 5.5 T Total platform height: 360mm Maximum lifting height: 1 850mm Bridge length: 5 000mm Raise time/lower time: 70/65 s Lifting...
♦ Tire changer with pneumatically tiltable column from front to back.♦ Simultaneous pneumatic locking of horizontal and vertical arms with...
TIRE CHANGER HC8511Maximum wheel diameter: 1150 mmMaximum permissible rim width: 14 inchesClamping jaws (inside): 12 to 25 inchesClamping jaws...
♦ Fixed balancer for passenger and van wheels.♦ Digital readout with high brightness LED display and integrated keyboard easy to use, simple and...
THIS PRICE INCLUDES INSTALLATION AND TRAINING AT THE MANUFACTURER IN HOLLAND (50 KILOMETERS FROM ANTWERP)
♦ Ideal for tire, brake, suspension and body maintenance.♦ Surface or mobile use with optional mobile kit.♦ Special, convenient platform extension...
- The cylinder stroke is 915 mm. - Lifting process with hydraulic cylinder. - Iron motor with steel tank.The power unit adopts CBK gear pump as...